There are currently no product reviews.
I am very happy regarding the online purchase of this manual from Owner-Manuals.com as with this I could set right my Denon CD player and Amplifier.
I once again sincerely thank them for the prompt service which was rendered to me.
More than pleased with my prurchase, very good product for the price.
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
SPECIFIED VALUES, CONDITIONS TEST CONDITIONS, REFERENCES CONNEC STANDARD VALUES RELIABILITY LIMITS TION
> 130g Loading > 130g
Clamping Force Mechanical Noise
Eject -Test should be performed in no reverberation If anything is not < 75dB(A) error, shall not room at the noise level of less than 20dB(A). Play < 40dB(A) -Test should be performed at the 50cm in front defined. Access < 70dB(A) of the unit. -IHF-A MODE (RMS-FAST)(TCD-792D)
>1.0g/10Hz-20Hz, Z way >2.0g/30Hz-200Hz, Z way >0.6g/10Hz-20Hz, X&Yway >1.2g/30Hz-200Hz, X&Yway X=side to side Y=front to back Z=up to down
-The G level should be upped to the sound skip level from the less level slowly at the Z way only 10Hz-20Hz:0.7g frequency. 30Hz-200Hz:1.2g -Ignore the sound skip at the near of resonance frequency(about 100Hz). -In playing YEDS-10 Tr #5, shall perform with vibration -No sound skipping. -No sound skipping in the specified range. equal with -The sound skipping does not include any standard values interpolating noise.
-Interruption:0.7mm -Block Dot Disc:0.8mm -Scratch Disc:1mm -Finger Print Disc:65um
10 Disc Deflection
-No sound skipping at the ABEX 731RA Tr No8 -The sound skipping does not include any interpolating noise. -Except from specified item due to the reliability limits of TEST DISC in the HTO TEST. -No sound skipping at the ABEX 713 Tr No8 -The sound skipping does not include any interpolating noise. -Except from specified item due to the reliability limits of TEST DISC in the HTO TEST.
12 Jitter 13 14 15 Frequency Response Harmonic Distortion Dynamic Range S/N Ratio Channel
< 28 nsec 20-20kHz + 2dB < 0.03% at 1kHz > 80dB at 1kHz
< 33 nsec 20-20kHz + 3dB This measurement may be done at 20Hz, 20kHz, (1kHz=0dB) < 0.05% at 1kHz 400Hz HIGHPASS FILTER 20kHz(-60dB 24kHz) LOWPASS FILTER > 75dB at 1kHz 20kHz(-60dB 24kHz) LOWPASS FILTER, 60dB AMP IHF-A WEIGHTING FILTER > 85dB at 1kHz > 65dB at 1kHz 400Hz HIGHPASS FILTER 20kHz (-60dB 24kHz)LOWPASS FILTER 10
> 85dB at 1kHz > 70dB at 1kHz