There are currently no product reviews.
Very good manual. Plenty of service information including alignment instructions. Clear circuit diagram. Excellent, thank you.
Good morning, the service manual you sent me was perfect.
Your service and answering are excellent.
I recomend this service.
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
complete part-lists and pcb layout, schematic diagram is good enlargable,
SPECIFIED VALUES, CONDITIONS TEST CONDITIONS, REFERENCES CONNEC STANDARD VALUES RELIABILITY LIMITS TION
> 130g Loading > 130g
Clamping Force Mechanical Noise
Eject -Test should be performed in no reverberation If anything is not < 75dB(A) error, shall not room at the noise level of less than 20dB(A). Play < 40dB(A) -Test should be performed at the 50cm in front defined. Access < 70dB(A) of the unit. -IHF-A MODE (RMS-FAST)(TCD-792D)
>1.0g/10Hz-20Hz, Z way >2.0g/30Hz-200Hz, Z way >0.6g/10Hz-20Hz, X&Yway >1.2g/30Hz-200Hz, X&Yway X=side to side Y=front to back Z=up to down
-The G level should be upped to the sound skip level from the less level slowly at the Z way only 10Hz-20Hz:0.7g frequency. 30Hz-200Hz:1.2g -Ignore the sound skip at the near of resonance frequency(about 100Hz). -In playing YEDS-10 Tr #5, shall perform with vibration -No sound skipping. -No sound skipping in the specified range. equal with -The sound skipping does not include any standard values interpolating noise.
-Interruption:0.7mm -Block Dot Disc:0.8mm -Scratch Disc:1mm -Finger Print Disc:65um
10 Disc Deflection
-No sound skipping at the ABEX 731RA Tr No8 -The sound skipping does not include any interpolating noise. -Except from specified item due to the reliability limits of TEST DISC in the HTO TEST. -No sound skipping at the ABEX 713 Tr No8 -The sound skipping does not include any interpolating noise. -Except from specified item due to the reliability limits of TEST DISC in the HTO TEST.
12 Jitter 13 14 15 Frequency Response Harmonic Distortion Dynamic Range S/N Ratio Channel
< 28 nsec 20-20kHz + 2dB < 0.03% at 1kHz > 80dB at 1kHz
< 33 nsec 20-20kHz + 3dB This measurement may be done at 20Hz, 20kHz, (1kHz=0dB) < 0.05% at 1kHz 400Hz HIGHPASS FILTER 20kHz(-60dB 24kHz) LOWPASS FILTER > 75dB at 1kHz 20kHz(-60dB 24kHz) LOWPASS FILTER, 60dB AMP IHF-A WEIGHTING FILTER > 85dB at 1kHz > 65dB at 1kHz 400Hz HIGHPASS FILTER 20kHz (-60dB 24kHz)LOWPASS FILTER 10
> 85dB at 1kHz > 70dB at 1kHz