The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
This scanned manual is well done in that most all the pages except for one is straight and clear- the way I would do them. One page was upside down but that happens. For the money that is charged on this site you get a pretty good deal. Now with complex repairs, I still prefer to us paper manuals which I have to buy at stereomanuals but the one I got here was much less than the $45 he was charging but this is a larger than normal manual for three different units. I am a picky manual user because I have used original manuals from Sony and Teac.
Text excerpt from page 9 (click to view)
ALIGNMENT INSTRUCTIONS
3. VERTICAL SIZE
* The VERTICAL CENTER adjustment has to be done in advance. 1) Apply a RETMA PATTERN Signal. 2) Set the TV to Normal I mode. 3) Adjust the VERTICAL SIZE of the picture with the select V.size by volume UP/DOWN keys.
4. VERTICAL S-CORRECTION ( Fixed : Adjust if need be )
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the S-CORRECTION to obtain the same distance between horizontal lines with the S.Curve by volume UP/DOWN keys.
5. HORIZONTAL CENTER
1) Apply a RETMA PATTERN Signal. 2) Adjust picture centering with the select H.Center by volume UP/DOWN keys.
EW 1. WIDTH
1) Apply a RETMA PATTERN Signal. 2) Adjust the horizontal width to make a perfect circle with the select H.Width by volume UP/DOWN keys.
2. PARA
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the vertical line to straight with the select E.W Para by volume UP/DOWN keys.
3. CORNER ( Fixed : Adjust if need be )
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the vertical line to straight with the select EW.Cor T by volume UP/DOWN keys.
1) Apply a CROSSHATCH PATTERN Signal. volume UP/DOWN keys.
4. SYMMETRY ( Fixed : Adjust if need be )
2) Adjust the symmetrical balance to be suitable with the select EW Sym by