|
|
|
Who's Online
There currently are 5750 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
PDF Contains
Technical Data, Mechanical data, Detailed Circuit diagram with components value, PCB layout. Actual PCBs Print. Component List, Spare parts code list and Input output detail. It cover LBB1211, LBB1212, LBB1213, LBB1216, LBB1217.
It is the actual Service Manual for SQ10
;
very good manual with clear electrical schemes. Very helpful to find wat was wrong inside my microwave.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
§ VERTICAL HIGHT ADJUSTMENT
1. Receive the RETMA PATTERN. 2. Set the user control to AUTO PICTURE ON. 3. Adjust the R301 so that the CENTER of circumference of big circle may meet with the upper and lower sides of screen.
4 1 5 3 1 1
4 1 3 5
1 4
1 4
§ WHITE BALANCE ADJUSTMENT
1.Execute HEAT RUN of the TV SET over 30 minutes with SERVICE REMOCON. 2.Connect the signal output of WHITE BALANCE TESTER (Nitsuki 2840) to the ANTENNA (or VIDEO IN) input of the TV SET. Stick and �x the SENSOR to the center position of CRT. 3. Adjust the R,G,B BIAS and G,B DRIVE VOLUME in order that R,G,B of the HIGH and LOW BEAM may meet with the CENTER LED of each measuring instrument. 4. At this time, the memorized coordinates of the WHITE BALANCE TESTER, unless otherwise speci�ed, use following coordinates and color temperature (PAL:9600K 3~5ftL 265¡¿295 , NTSC: 10850K 3~5ftL 274¡¿289)
§ SUB-BRIGHT ADJUSTMENT
1. Receive the RETMA PATTERN. 2. Set the user control to AUTO PICTURE ON. 3. Turn the SUB-BRIGHT CONTROL VOLUME (R540) and adjust the gradation pattern as shown. 4. The status that the border between 15% and 20% can be distinguished.
9
|
|
|
> |
|
