|
Who's Online
There currently are 5638 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This was an excellent source of detailed assembly information on a device which is at least 12 years old. A very lucky find, coupled with great service.
;
Excellent Service Manual and best price on the Internet. This Service Manual covers everything you could ever need including full circuit schematics, component layout diagrams, stripdown procedure and full parts list/breakdown. I needed this to carry out a modification to one of these headunits and this manual covered everything I needed. Fast delivery, processed within a few hours.
;
Thought I would never find a copy of the Technics SX-EN2 Service Manual until I found Owner-Manuals.com. Price was very fair and I received the download promptly. While a photocopy, it is quite readable and includes all the pertinent information and diagrams. Thank you Owner-Manuals!
;
I really like this manual and it's reliable.I found and bought easly.thank you.
;
Thank you very much. the Instruction corresponds to my expectations. Sent it in time. I don't regret that paid money.
6. GEOMETRY 6.1 VERTICAL CENTER
1) Set the TV to � NORMAL I�mode. 2) Enter the service mode. 3) Locate the cusor at � V.CENTER�then press � VOL +� or � VOL -�keys to adjust the center line with the mechanical center marks of the CRT.
6.2 VERTICAL SIZE
* The VERTICAL CENTER adjustment has to be done in advance. 1) Receive the Retma pattern. 2) Set the TV to � NORMAL I�mode. 3) Enter the service mode. 4) Locate the cursor at � V.SIZE�then press � VOL +� or � VOL -�keys to adjust the upper part of the picture.
6.3 HORIZONTAL CENTER
1) Apply a RETMA PATTERN signal. 2) Set the TV to � NORMAL I�mode. 3) Enter the service mode. 4) Locate the cursor at � H.CENTER�then press � VOL +� or � VOL -�keys to adjust the picture centering.
if EEPROM(I702) has been changed; - Option data has to be change and - all alignment function has to be readjusted * The initial state of adjustment are as follows; - V-Center, V-Size, H-Center, R, G, B, AFT = Center ( - AGC = * Service Remocon )
|
|
|
> |
|