|
|
|
Who's Online
There currently are 5853 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
El producto satisface las necesidades del servicio t
;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
ALIGNMENT INSTRUCTIONS
1. SERVICE MODE ADJUSTMENTS
Follow the steps below whenever service adjustment is required. See Table- A and Table- B to determine if service adjustments are required. 1) How to enter the service mode using the user remote control. � Turn the set on. � Direct the remote control to the reception window of TV. � Push buttons of remote control in sequence as follows. 1 � MUTE � DISPLAY � MUTE � Then, the screen will appear as follows.
S2
S5 S6 S8 S9 S12 S7
SCRN
IFC GEO W/B DP FACT PTRN NORMAL
� Using the channel up or channel down button, select the item you wish to adjust.
(The color of selected item turns into the red.) � Press the volume up or down button to enter in the service mode you wish to adjust. 2) How to memorize the adjusted values in the service mode. � Must press DISPLAY button the state which the screen is displaying each of service menus after all adjustments are completed each of all service menu. Table-A : Adjust the values of service mode when a part is replaced.
PART REPLACED
I701 (U-COM) I101 (MAIN)
ADJUSTMENT NECESSARY UNNECESSARY
O O Data is stored in I703.
NOTES
Initial setting values are written from I701. Adjusting Items I703 (EEPROM) O
S5 S6 S8 S9 RFAGCD H.PHASE/V.POSI/V.SIZE RD/BD/RB/GB/BB Subbrightness
CRT
O
Adjust items related to picture tube only.(White Balance adjustment)
7
|
|
|
> |
|
