Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Very good scanning quality. All schematics are very legible. Worth every cent !
Text excerpt from page 8 (click to view)
1. SERVICE MODE ADJUSTMENTS
Follow the steps below whenever service adjustment is required. See Table- A and Table- B to determine if service adjustments are required. 1) How to enter the service mode using the user remote control. â¢ Turn the set on. â¢ Direct the remote control to the reception window of TV. â¢ Push buttons of remote control in sequence as follows. 1 â MUTE â DISPLAY â MUTE â¢ Then, the screen will appear as follows.
S5 S6 S8 S9 S12 S7
IFC GEO W/B DP FACT PTRN NORMAL
â¢ Using the channel up or channel down button, select the item you wish to adjust.
(The color of selected item turns into the red.) â¢ Press the volume up or down button to enter in the service mode you wish to adjust. 2) How to memorize the adjusted values in the service mode. â¢ Must press DISPLAY button the state which the screen is displaying each of service menus after all adjustments are completed each of all service menu. Table-A : Adjust the values of service mode when a part is replaced.
I701 (U-COM) I101 (MAIN)
ADJUSTMENT NECESSARY UNNECESSARY
O O Data is stored in I703.
Initial setting values are written from I701. Adjusting Items I703 (EEPROM) O
S5 S6 S8 S9 RFAGCD H.PHASE/V.POSI/V.SIZE RD/BD/RB/GB/BB Subbrightness
Adjust items related to picture tube only.(White Balance adjustment)