|
|
|
Who's Online
There currently are 5862 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
great works fine, got the manual on mail within a day
;
First class Service,
best quality, come again
Thank You.
vac
;
I didn't realise a manual for an early plasma TV such as the one we were gifted could be so easily obtained. No manual was supplied with it, and as senior citizens we were a little puzzled over some aspects of its use. I do not want a listing for your store credit as we are not fairly big computer users. The manual was well organised, as it should be, with its backing of the Pioneer name. The download was prompt and everything worked quite smoothly. Thank you. Gordon.
;
Thank you very much for the manual. It is what I needed and it will be very helpful to me. The delivery of the manual was easy and very fast. I strongly recommend this site to other users. Best regards.
 ;
Excellent!! Got what I need and very fast!! Thank You
CIRCUIT OPERATIONAL DESCRIPTION
4) SDRAM : HY57V660ET-7 (DV-000S/DV-00S/DV-200S/DV-300S/DV-400S/DV-70S) This sends and receives data with MPEG decoder and performs the video signal processing. Every video signal output from DVD player is once stored in SDRAM and then encoded in MPEG decoder and finally output into the analog signal. SDRAM applied to DVD module has the capacity of 6MBit(048576 x 6bit x Bank), sends and receives data with MPEG decoder by 6 bit. Description THE Hynix HY57V660E is a 6,777,26 bits CMOS Synchronous DRAM, ideally suited for the main memory and graphic appli-cations which require large memory density and high bandwidth. HY57V660E is organized as 2banks of 524,288x6. HY57V660E is offering fully synchronous operation referenced to a positive edge clock. All inputs and outputs are synchronizedwith the rising edge of the clock input. The data paths are internally pipelined to achieve very high bandwidth. All input and outputvoltage levels are compatible with LVTTL. Programmable options include the length of pipeline (Read latency of ,2 or 3), the number of consecutive read or write cycles initi-ated by a single control command (Burst length of ,2,4,8 or full page), and the burst count sequence(sequential or interleave). Aburst of read or write cycles in progress can be terminated by a burst terminate command or can be interrupted and replaced by anew burst read or write command on any cycle. (This pipeline design is not restricted by a `2N` rule.)
3
Sm(DAEWOO_1389C)060109.indd
13
2006-1-13
15:42:03
|
|
|
> |
|
