This scanned manual is well done in that most all the pages except for one is straight and clear- the way I would do them. One page was upside down but that happens. For the money that is charged on this site you get a pretty good deal. Now with complex repairs, I still prefer to us paper manuals which I have to buy at stereomanuals but the one I got here was much less than the $45 he was charging but this is a larger than normal manual for three different units. I am a picky manual user because I have used original manuals from Sony and Teac.
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
Text excerpt from page 9 (click to view)
2. PLAYBACK Y-SINGAL OUTPUT LEVEL Adj. Location RV396 Checking Point TP396 Measuring Equipment Oscilloscope Mode PB Test Tape DP-1
1) Playback the test tape (Color Bar Signal). 2) Connect the oscilloscope to TP396 and trigger the scope will a composite SYNC signal at TP313. 1) Adjust the scope so that it can display a waveform of approx. 2H. 3) Adjust RV396 to optain 2.0VP¡ 0.2 Vp-p between the SYNC TIP and 100% white level.
2.0¡ 0.2Vp-p
Horizontal 10Â¥s/div Vertical 0.5V/div.
3. SYNC TIP FREQUENCY Adj. Location RV391 Checking Point TP391 Measuring Equipment Oscilloscope Mode REC. Test Tape �¡
1) Set the unit to stop mode without video signal. (Jack of video line input is shorted with ground). 2) Conncet the frequency counter to TP391. 3) Adjust RV391 until the SYNC TIP frequency becomes 3.80 MHz¡ 0.1 MHz.