|
Who's Online
There currently are 5923 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Thank you very much, I've been very happy to find this manual on "Owner Manual". It's a perfect copy and it has been really useful for my work!
;
It took about 24-hours after my payment before I was able to get to the download. Apparently, payment processing is not 100% automated. That is no big deal, just be aware of that going in.
After I got to it, it was in good shape, easy to read, etc. Not some cheap FAX copy looking thing.
Also, this site was the cheapest I found. Another Plus!
;
Good price, very legible manual, exactly what I needed -- but had to wait a day to actually get the download of the manual. Would have preferred to download it immediately after payment rather than waiting for someone to "process" my order. I was surprised that I had to wait that long.
;
As the only source for this manual it rather rank quite high since it is well scanned and perfectly readable.
;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
Trouble Diagnosis
8-2. Typical Symptoms of PCBs problem or bad connection A. Symptom of initial latch up - Define initial latch up : When turn on the power, both LEDs light up red and TV is not working. - Repairing method : This is typical symptom when ROM(ICU3) is incorrectly connected at socket. So if you find this symptom, you must try to that ROM(ICU3) and socket have correct contact. - As this method, TV set is not repaired, replace MAIN PCB. B. Symptom of No image when LED and Back Light are working. - Define No image : LED and BACK LIGHT of panel are correctly working but any image does not display. - Repairing method : This is typical symptom when LVDS cable incorrectly connects. So if you find this symptom, check LVDS connection. - As this method, TV set is not repaired, replace Main or Sub PCB. C. Representative Symptom caused by bad Connection between PCBs => Note: Dust or extraneous material may cause bad connections. Most of the time, applying soft brush, AIR FRESHIER, or breath to clean dust or extraneous materials can solve it. And then reassemble the Connector.
-44-
|
|
|
> |
|